Liquid-Liquid Separation

Engineering articles on liquid-liquid separation: coalescer selection for produced water, aromatics extraction and polycarbonate plants, plate pack sizing and OEM-equivalent cartridge replacement. Related equipment is listed on the liquid-liquid separation product page.

10/30/2026

Liquid-Liquid Separation in Polycarbonate Production: Coalescer Internals for Wash Trains and Solvent Recovery

Polycarbonate wash trains present one of the hardest liquid-liquid separation duties in polymer production: micron-scale aqueous droplets, a low density difference, a solvent that wets everything, and an organic phase whose viscosity climbs with every wash stage. This article explains how a staged coalescer arrangement — inclined plates, knitted wire mesh and fiberbed cartridges — delivers bulk removal, fine droplet agglomeration and final polish without the shear that centrifuges introduce, and how the same media recover DCM from wastewater before discharge.
10/30/2026

Double-Filament Wire Mesh Coalescer for Hydrogen Peroxide Extraction

Organic working solution entrainment in aqueous hydrogen peroxide after extraction is a persistent purity and safety issue. Double-filament wire mesh coalescers, combining hydrophilic and hydrophobic filaments, offer a passive, reliable solution for achieving residual organic carryover below 50 ppm.
10/30/2026

Wire Mesh Coalescers for Aromatics Extraction Buffer Settlers

Undersized settlers and degraded solvent in aromatics extraction units cause solvent carryover and aromatics loss. Retrofitting knitted wire mesh coalescers into existing buffer drums offers a no-vessel-modification solution to enhance phase disengagement, reduce wash water load, and recover valuable product.